GP Acetic Silicone Sealant

DESCRIPTION

GP Acetic Silicone Sealant is one-component, acetoxy cure, high quality silicone sealant designed for general purpose glazing and waterproofing application. It has high tensile strength and good elasticity, excellent weatherability, waterproof and good adhesion to most construction materials.

CHARACTERISTICS

1. It is a one-component, acetic cure, room temperature and suitable for sealing interior gap filler, doors, windows, glass related.

2. Imported organic silicon raw material production, good elasticity, moderate hardness, fast curing speed, easy to use.

3. Excellent water resistance, anti-aging and climate, high and low temperature performance, long service life.

4. Good adhesion to most building materials.

MAIN USE

1. For windows glazing, door frames, display cupboards，all kinds of indoors and outdoors glass engineering.
2. For sealing glass, aluminum alloy and ceramic.
3. For other general waterproof and sealing purpose.

USE INSTRUCTIONS

1. Clean with solvents such as toluene or acetone to keep the substrate surfaces completely clean and dry.
2. For better appearance, cover outside of joint areas with masking taps before application.
3. Cut seal on top of cartridge. Screw on nozzle and cut the nozzle at 45°angle to the desired size and extrudes sealant to joint areas.
4. Tool immediately after sealant application and remove masking tape before sealant skins.

USE RESTRICTIONS

1. Unsuitable for curtain wall structural adhesive.
2. Unsuitable for the airproof location, because it is required to absorb moisture in air to cure for the sealant.
3. Unsuitable for the frosty or moist surface.
4. Unsuitable for the continually soggy place.
5. Can’t be used if the temperature is below 4°C or above 40°C on the surface of the material.

SAFETY RECOMMENDATION

1. The silicone sealant will release volatile compound during curing, it may be bad to health if you breathe in the volatile compound for a long time. So please ensure adequate ventilation at the workplace or curing area.
2. The cured silicone sealant will not release any harmful substance and cause any damage to human body.
3. Keep uncured silicone sealant beyond children's reach. If getting into eyes, wash with running water for several minutes, and then consult a doctor.

COLOR

Clear, white, black, grey and other colors based on customer's requirement.

PACKING

240ml/260ml/280ml/300ml per pcs in disposable plastic cartridge, 24pcs per carton.

TRANSPORTATION

This product is transported by non-dangerous goods.

STORAGE

1. Keep in dry, cool and well-ventilated area. Keep away from heat source and direct sunlight during storage.

2. When stored at the temperature of 5℃-25℃ in the original unopened container, it has a shelf life of 9 months from the date of manufacture.

STANDARD
GB/T 14683-2017

TECHNICAL DATA SHEET (TDS)

The following data are for reference purpose only, not intended for use in preparing specifications.