MS-580 Liquid Nails

DESCRIPTION

MS-580 Liquid Nails is a high strength, professional quality adhesive specifically formulated to eliminate much of the nailing required for construction purposes. The adhesive provides a high strength, water resistant bond to a wide variety of materials.

CHARACTERISTICS

1. Can be applied to wet or frozen timber.
2. Will not slump off vertical surfaces. Bridges reasonable gaps and will adhere materials with uneven surfaces.
3. Remains easily extrudable at low winter temperatures.
4. Sufficient flexibility to allow some board shrinkage or movement.
5. Paintable.

MAIN USE

1. Bonding the door frame, door and window cover, stairs, etc. in the house decoration. Bonding wood to other materials such as aluminum and stainless steel.
2. Bonding flooring, insulation, wood, melamine, plaster, and metal trim in house decoration.
3. Bonding ceramic tiles, cultural stone, marble, aluminum edge and other stone window sills, cabinet counters, etc.
4. Bonding mirrors, glass, ceramics, long-term load-bearing hooks, etc.
5. Bonding hangings of various materials inside and outside the room.

USE INSTRUCTIONS

1. Nail Free Adhesive construction material selection: It is most suitable for bonding the following materials in concrete, all kinds of stone, wall plaster, wood and plywood surface: wood, plastic, metal, threshold, signage, slat, door base, window sill, junction box, sheet material, gypsum board, embellished stone, ceramic tile, etc., not suitable for foam materials.
2. Clean the construction surface to ensure no oil and dirt, and remove all loose components.

3. Cut cartridge tip, fit nozzle and cut end to desired opening (approx 5mm diameter).

4. Direct a bead along the length of the joist, stud or batten. On broad flat surfaces apply beads every 450 mm.

5. Fix with sufficient nails, screws or clamping to hold load and achieve contact over the total bond area.

6. Allow adhesives to set (at least 24 hours) before removing any temporary fasteners or clamping.

7. For faster grab – use the contact bond method – apply to one surface only, press together and pull apart.

8. Allow surfaces to dry 2-5 minutes before firmly joining. Surfaces should not be kept apart for longer than 20 minutes as to do so will impair bond strength.

SAFETY RECOMMENDATION

1. Avoid prolonged skin contact.

2. Keep away from children.

3. Avoid breathing in vapors. Intentional misuse or deliberately inhaling the vapors from this product can be harmful or fatal.

4. Highly flammable. Vapors can be ignited by flamer sparks.

5. If swallowed, do not induce vomiting.

COLOR

White, beige and other colors based on customer's requirement.

PACKING

It is available in 300ml recyclable aluminum paper cartridge, 24pcs/ctn.

TRANSPORTATION

This product is transported by non-dangerous goods.

STORAGE

1. Keep in dry, cool and well-ventilated area. Keep away from heat source and direct sunlight during storage.

2. When stored at the temperature of 5℃-25℃ in the original unopened container, it has a shelf life of 12 months from the date of manufacture.

STANDARD

JC/T 2186-2013

TECHNICAL DATA SHEET (TDS)

The following data are for reference purpose only, not intended for use in preparing specifications.